-
Weighing Control Indicator XK3101N
Weighing Control Indicator XK3101N
Specification：
It can display weight and output analog signal at the same time . It adopts high precision A/D transformer with 24 digits to deal with front-end signal or weighing transducer, and adopts D/A transformer with 16 digits to output analog signal . It is with small cassette type aluminum enclosure . which is convenient to insert it into control cabinet .
Indicator Main Features
Help excite circle overload of load cell and can protect from short circuit
Optional updating speed rate:6.25times/sec,12.5times/sec,25 Times/sec,50times/sec
Two-point(open)relay output. mode of output can be set as separate Weight mode and stated value mode
Isolated digital communicating connector, which can be chosen from RS232 and RS485
Analog output can be set into 4types such as 4~20mA,0~20Ma,0~5V and 0~10V
Load cell excitation voltage: DC5V -
Weighing Transducer Load cell Amplifier KM02 Series
Weighing Transducer Load cell Amplifier KM02 Series
Introduction:
KM02 Serial Weighing Transducer adopts high precise amplifier . Amplify weak analog signals from load cells and output this amplified signal . It is very convenient to adjust output excursion and amplify multiples by potentiometer . -
Two Relay Output Weighing Indicator XK3190-C8+
Two Relay Output Weighing Indicator XK3190-C8+
Specification:
Weighing indicator XK3190-C8+ adopts fast speed ∑-Δ A/D conversion technology. It is widely applied in
electronic batching scale、electronic fix-value scale and electronic catch weigher, sort of control system. Meanwhile, it has function for Max and Min limitation alarm and peak value preserving. -
Truck Scale Digital Weighing Indicator D2008H
Truck Scale Digital Weighing Indicator D2008H
Specification:
D2008H is with built-in electrical isolation and anti-static design. It decrease some phenomenon
caused for connecting the floor like serial interface damage, load cell damage, unstable weight, communication problem. The design of Cells Lightning Protection is improved the protection ability
and suit for static digital
truck scale system.(AC is transformer type) -
Two Relay Output Weighing Indicator XK315A1X-T
Two Relay Output Weighing Indicator XK315A1X-T
Application:
Electronic platform scale and weighing scale, etc.
Feature
30hours of full charge battery operation
Drive up to 4×350Ω or 8×700Ω load cells
Manual/Automatic accumulation
Programmable zero tracking
Programmable digital filter
Selectable kg and lb
RS232 serial interface -
Two Relay Weighing Indicator XK315AGB-3T
Two Relay Weighing Indicator XK315AGB-3T
Application:
Electronic platform scale and weighing scale, etc.
Feature：
20 hours of full charge battery operation
Drive up to 4×350Ω or 8×700Ω load cells
Manual/Automatic accumulation
Programmable zero tracking
Programmable digital filter
Selectable kg and lb
RS232 serial interface
Accuracy can be increased ten times -
Two Relay Output Weighing Indicator XK315AGB-5T
Two Relay Output Weighing Indicator XK315AGB-5T
Application:
Electronic platform scale and weighing scale, etc.
Feature：
20 hours of full charge battery operation
Drive up to 4×350Ω or 8×700Ω load cells
Manual/Automatic accumulation
Programmable zero tracking
Programmable digital filter
Selectable kg and lb
RS232 serial interface -
Load Cells Testing Indicator Device SM204-A
Load Cells Testing Indicator Device SM204-A
Application:
SM204-A Testing Instrument For Strain Gauge Sensor
Features:
High precision, in excess of 300,000 accuracy, Unit accuracy equal 0.05uV, when the ISN state, increased 5 times.
*Fast and stable display.
*Denoting Zero when testing.
*No need external power,the power out put by instrument .
*Used for manufactory of strain gauge sensor, low-cost,high efficiency.